Pool Filter Maintenance

Top 5 Tips for Pool Filter Maintenance

It’s tempting to surrender to fantasies of achieving the perfect tan in sparkling pools, doing breaststroke laps, or throwing poolside parties on weekends.


However, these daydreams tend to overlook the most important aspect of owning a pool: filtering the pool and maintaining all the components.


Here’s a chance to remove the stress of the Pool filter maintenance by presenting the top five ways to maintain your perfect pool. Keep reading if you’re looking for an exciting summer full of swimming and barbecues.


Why is Pool Filter Maintenance Important?

Filters are an important part to maintaining a healthy, clean swimming pool. They are made to eliminate dirt, debris, calcium, and oil. However, the filters aren’t capable of cleaning themselves. That means you’ll need to physically remove and clean your filter system. 


If you’re not very adept in DIY at-home electrical, plumbing cleaning, or pool filtering systems, you’ll need to contact a professional. They’ll be able to offer you the seasonal cleaning of your pool filters efficiently and quickly.


Maintaining your pool’s filter is generally simple and essential to be done at least once per month. The procedure for maintenance will depend on the kind of filter that you own. For a cartridge pool filter, it is necessary to shut off the pump and then remove the filter. You’ll then need to scrub off any dirt and other debris prior to placing the filter back into the correct position. There are times when people utilize filter cleaners for a more thorough cleaning.

Tips for Pool Filter Maintenance


  • Clean Up

Skim, sweep, and scrub are all terms that will be very important to you during the path to a paradise in the pool.


Robotic cleaners, also known as creepy crawlies’, eat dirt, leaves, and insects from the pool’s floor. Let the creepy be in motion, and then clean the tray once every couple of days.


Additionally, leaf skimmers are recommended to be used every two days to collect debris off the pool’s surface. Skimming the pool will relieve some pressure from the system for filtering the pool.


  • Benefits of backwash 

Every month, it’s recommended to perform a backwash to make sure that the filter pipes are thoroughly cleaned. In order to do this, switch the filter setting to “backwash” and wash the filter basket.


Let the pump continue to run till the pump releases clear water. Ensure that the timer is set for the filter and let it run at least six hours each day to prevent this from happening. It’s crucial not to turn the filter on and off in a way that is too frequent because it can harm the mechanism.


Make sure to complete the cycle of washing.


  • Goals for pH Level

Keep your acid and chlorine levels at the recommended levels to stop the growth of algae or other organisms in your pool. Maintaining the proper balance of water is crucial to ensure the overall health of your filter.


The pH level can be described as an indicator of alkalinity or acidity. It should be checked every two weeks. The pH of the water in the pool must be slightly alkaline. This is a pH range of 7.2 to 7.8.


  • Seal the filters

Always make sure that the sealer surrounding the filter in the pool is in good shape and safely secured. If the sealer around the filter is damaged, there will be unwanted debris. 


Additionally, ensure that all filters in the pump line are in good shape and not damaged, as otherwise, small pieces of bugs and leaves could pass through and end up in the filter.


If the sealer for your filter and baskets has been damaged, you’ll be faced with more serious issues. Instead, examine the seals on a regular basis.


  • Chlorine

In the summer months, when temperatures are high, and there is plenty of sunlight, adjust the chlorine levels according to the season as the sun destroys the chlorine and, therefore, in summer, you’ll be required to add more.


The need for effective maintenance of your filter is crucial all through the year, but it’s especially important in the midst of peak swimming season. If you can, keep in mind that draining your pool completely isn’t a good decision, even during winter.


A pool that is not filled with water could be extremely risky and should not be endorsed by any working professionals in the pool industry.


Need Help With Your Swimming Pool Filter Maintenance?

Let’s face it, cleaning the pool’s filters isn’t an enjoyable experience. And, of course, most pool owners have difficulty figuring out which filter cleaners to pick and how to use them properly.


Fortunately, you don’t have to tackle these tasks on your own. You can seek out experts to complete the task and to keep your pool well-maintained all year round.


If you’re looking for an inspection of your pool, filter cleaning, or equipment repair, Alliance Pools & Patio is here to help. Contact us now!


Final Word

These steps to clean the pool filter can ensure that your filtration system is in good condition, regardless of the type of filter you own. Regularly cleaning your filter helps make your pool last longer, function better, and keep the pool’s water in balance and healthy.